STEP 1
In Internet explorer, clear the address bar totally and type 10.0.0.2, press [Enter]

A Login box should apear, asking for a username and password.

Username: admin
Password: administrator

1. Virtual Circuit is ENABLED
2. Bridge is DISABLED
3. Encapsulation is PPPOE LLC
(Second last option in the list)
4. VPI = 8
5. VCI = 35

Take a look on the right hand side.

1. SERVICE NAME should be set to Web Africa
2 .USERNAME must be your username eg: thd01@wadsl
(all in lower case)
3. PASSWORD must be your password for the service

Once you have completed the above steps, press [Submit] , then [Save Configuration]
Another page should come up, where you need to click on [Save and Reboot]

Once that has been done successfully another window should come up saying Save and Reboot Successful
STEP 4

On your main router page, click on PPP under STATUS and then you will need to push EXECUTE next to Connect.
You will then see it will say , under the STATUS TAB CONNECTED